Contact Viewer (Optional); Create The Contacts Database - Medion Navigation Unit Operating Instructions Manual

Contact Viewer (optional)

Depending on the software equipment your navigation system is equipped with a Con-
tact Viewer.
You will be able to create the contacts database (from Outlook 2003 or Outlook XP) and
administrate your contacts with the Contact Viewer.

Create the contacts database

The Contact Viewer will search for the contacts database on your storage card and in
'My Flash Disk', in order to deposit contacts. The 'contacts.db' file must be present in
the contacts sub-directory for this purpose:
•
\Storage Card\contacts\contacts.db or
•
\My Flash Disk\contacts\contacts.db
Note
The memory card must not be write-protected.
The more recent contacts database will be used if one is found both on the Storage Card
and in My Flash Disk. The internal date (date of creation) will be decisive to the selection
of the database.
You will be able to the export contacts from Microsoft Outlook with the Medion GoPal
Assistant. Proceed as follows to do this:
1. Connect your navigation system to the computer or insert a storage card into your
card reader.
2. Select the destination for the synchronization (memory card or internal memory of
the device) in Gopal Assistant.
3. Select Synchronize.
4. Activate the Export Outlook Contacts Option.
5. Confirm with Synchronize.
6. The contacts database will be transferred to your navigation system.
Contact Viewer (optional) 69