Advanced; Administrator - AT&T Home Base User Manual

Firewall - DMZ
The DMZ, or De-Militarized Zone, is a selected internal IP address of a device that
allows full access and connectivity from outside traffic, through the firewall, to a
specific internal device without being filtered or blocked by the AT&T Home Base.
DMZ Settings: You may choose to enable or disable the DMZ setting here.
DMZ is set to Disabled by default.
DMZ IP Address: Enter the internal IP address of the desired device that will be
directly accessible from outside the firewall.
42

Advanced

Advanced - Administrator
This page allows you to change the default login (attadmin) that is used to access
the AT&T Home Base Manager.
Current Login: Enter the current login for the AT&T Home Base Manager in this
field. The default login is "attadmin."
New Login: Enter the new login, using only letters, numbers, and standard
punctuation symbols. The password must be at least 4 characters long. The
maximum length is 32 characters.
Verify New Login: Re-enter the new login in this field, then click "Apply."
Note: Once you change the default login, there is no way to retrieve the new
login. You must reset the AT&T Home Base to its factory settings to restore the
login to the default login "attadmin." Remove the bottom cover of your AT&T
Home Base and using a ballpoint pen, press and hold the RESET button for
eight (8) seconds.
Device Configuration Device Configuration 43