CONCORD Transformer X-BAG User Manual page 6

• After an accident the CONCORD TRANSFORMER must be replaced or returned to
the manufacturer for testing, along with a report of the accident.
• You should also tell your passenger how to remove the child in the event of an
accident or danger.
• Do not leave your child in the child car seat unsupervised whether strapped
in or not.
• Secure luggage and other items to reduce the risk of injury in the event of an
accident.
• The user instructions must always accompany the child car seat.
• The use of accessories and replacement parts is not permissible and shall lead,
in the event of contravention, to the expiry of all claims under the warranty and of all
liability claims. Only special CONCORD original accessories are excluded.
• Suitable for cars with three-point (lap and diagonal) seat belts tested in accordance
with ECE Regulation 16 or a comparable standard.
30
As the period of use for the CONCORD TRANSFORMER is very long, it is natural that
seat covers and other used parts will each receive different degrees of wear and tear
depending on the individual duration and intensity of use and will need to be replaced.
For this reason it is not possible to give a blanket warranty of durability extending
beyond a six-month warranty period. For additional purchases, please contact your
local specialist child and baby shop, specialist departments in department stores, a car
accessories centre or mail order companies. There you will also be able to buy the full
range of accessories for CONCORD child car seats.
The buckle of the vehicle safety belt must not come above the edge of the lap belt
guide. If in doubt or if you are still uncertain, please contact CONCORD. The belts may
only be routed via the points of contact and the positions on the seat stated in the user
instructions. Belts must not be routed in any other way.
If the car seat used has a front airbag, we recommend positioning the car seat as far
back as possible. For cars with front and side airbags, the instructions in the car's
operating manual must also be observed. The car's shoulder/diagonal belt must pass
forwards from the vehicle bracket to the shoulder belt guide (06). Adjust the car seat
position if necessary.
31