Yamaha FX Nytro FX10X Owner's Manual page 16

Hide thumbs Also See for FX Nytro FX10X:
Table of Contents

Advertisement

Control functions
Be sure to use the specified spark plug
G
and spark plug cap. Otherwise, the
T.O.R.S. will not work properly.
If the throttle bodies or throttle cable malfunc-
tions during operation, the T.O.R.S. will oper-
ate when the throttle lever is released.
The T.O.R.S. is designed to override the fuel
injection and limit the engine speed to less
than the clutch engagement speed if the throt-
tle valves fail to return to the idle position
when the throttle lever is released. (See page
74 for the clutch engagement speed.)
Idling /
starting
Throttle
Off
switch
Throttle
position
Closed
sensor
Engine
Run
Idling / starting
1. Throttle position sensor (throttle valve
closed position)
2. Throttle switch (off)
3. Throttle cable
10
Running
Trouble
On
Off
Open
Open
T.O.R.S.
Run
will oper-
ate.
Running
1. Throttle position sensor (throttle valve open
position)
2. Throttle switch (on)
Trouble
1. Throttle position sensor (throttle valve open
position)
2. Throttle switch (off)
NOTE:
When the T.O.R.S. is activated, the warn-
G
ing light and self-diagnosis warning indica-
tor will flash, and the two-digit code "84" will
flash in the meter display.
The T.O.R.S. monitors the condition of the
G
throttle position sensor, speedometer as-
sembly, and speed sensor, and will operate
if any of the monitored items is disconnect-
ed or is malfunctioning.

Advertisement

Table of Contents
loading

Table of Contents