Yamaha FX Nytro FX10X Owner's Manual page 34

Control functions
1. Locknut
2. Control rod adjusting nut
EWS00170
WARNING
Never adjust the control rods beyond the
maximum range indicated on the rods with
red paint.
1. Red paint area
2. Adjustable range
3. Standard position
28
3. Tighten the locknut while holding the con-
trol rod adjusting nut in place.
Locknut tightening torque:
25 Nm (2.5 m·kgf, 18 ft·lb)
ECS00800
CAUTION:
The left and right adjusting nuts must be
set to the same position. Uneven settings
can cause poor handling and loss of sta-
bility.