Yamaha FX Nytro FX10X Owner's Manual page 33

To increase the rebound damping force, turn
the adjusting dial in direction (a). To decrease
the rebound damping force, turn the adjusting
dial in direction (b).
1. Rebound damping force adjusting dial
Rebound damping force setting (center):
Minimum (soft):
20 click(s) in direction (b)*
Standard:
11 click(s) in direction (b)*
Maximum (hard):
3 click(s) in direction (b)*
* With the adjusting dial fully turned
lightly in direction (a)
1. Rebound damping force adjusting dial
Control functions
Rebound damping force setting (rear):
Minimum (soft):
20 click(s) in direction (b)*
Standard:
11 click(s) in direction (b)*
Maximum (hard):
3 click(s) in direction (b)*
* With the adjusting dial fully turned
lightly in direction (a)
ECS00790
CAUTION:
Do not continue to turn the adjusting
G
screw or dial in direction (a) after it
stops. The shock absorber can be dam-
aged and damping force adjustments
cannot be made.
Do not turn the adjusting screw or dial in
G
direction (b) beyond the adjustable
range. Even if the adjusting screw or dial
is continually turned beyond the adjust-
able range, there will be no change in the
damping force.
Be sure to stop the adjusting screw or
G
dial at a position where there is a click.
ESU13010
Adjusting the control rods (FX10MT /
FX10MTR / FX10MTRA)
The weight transfer can be adjusted by turn-
ing the control rod adjusting nut.
1. Loosen the locknut while holding the con-
trol rod adjusting nut.
2. Turn the control rod adjusting nut in direc-
tion (a) to increase weight transfer or di-
rection (b) to decrease weight transfer.
27