Replacing A Headlight Bulb - Yamaha FX Nytro FX10X Owner's Manual

EWS00510
WARNING
Apply a dab of grease onto the cable end
G
only. Do not grease the throttle cable be-
cause it could become frozen, which
could cause loss of control.
Be sure to have a Yamaha dealer lubri-
G
cate the front and rear suspensions.
Lubricant:
Low-temperature grease
1. Throttle cable end
1. Lubrication point
Periodic maintenance
1. Lubrication point
ESU12850

Replacing a headlight bulb

EWS00530
WARNING
Keep flammable products and your hands
away from the hot bulb until it has cooled
down.
1. Remove the shroud. (See page 43 for re-
moval procedures.)
2. Disconnect the headlight coupler.
3. Remove the bulb holder cover.
1. Headlight coupler
2. Bulb holder cover
4. Unhook the bulb holder by pushing it in,
then clockwise.
65