Changing Settings - 3Com XLPCI User Manual

4
This chapter describes how to display and change
configuration settings for the 3C900B NIC using
3Com diagnostic programs.
Before you change the settings, contact your system
administrator.
Table 4-1 lists the configurable options for the 3C900B
NIC, the default setting for each option, and other settings
that are available for each option.
.
Table 4-1 Option Settings
Option
Network Driver Optimization
Full-Duplex
Boot PROM
Media Type
PACE (Windows 95 and
Windows NT 4.0 only)
The 3C900B NIC supports full-duplex at 10 Mbps. If the
switch that you are connected to supports autonegotiation
and full-duplex, the 3C900B NIC automatically runs in
full-duplex mode.
C
HANGING
S
ETTINGS
Default Setting
Normal
Half-Duplex
Disabled
Auto Select
Disabled
C
ONFIGURATION
Available Settings
Minimized CPU Utilization,
Maximized Network
Performance, Normal
Half-Duplex, Full-Duplex
Disabled, 64K, 128K
10BASE-T (10Mb/s), Auto Select,
10BASE-2 (10Mb/s), AUI
(10Mb/s)
Enabled, Disabled