Windows Nt 4.0 - 3Com XLPCI User Manual

Windows NT 4.0

Follow these steps to install the network driver in a PC
running Windows NT 4.0:
1 Install the NIC, connect to the network, and turn the
power on.
2 Double-click the My Computer icon, double-click the
Control Panel icon, and then double-click the
Network icon.
The Network window appears.
3 Click the Adapters tab.
If you are replacing a NIC that was previously installed,
follow these steps. Otherwise, go to step 4.
a Select the existing NIC (that is being replaced) in the
b Click Remove.
c Click Yes in the Warning dialog box.
d Reboot the PC and repeat step 2.
4 Click Add.
The Select Network Adapter dialog box appears.
5 Click Have Disk.
6 Insert EtherDisk diskette 2 in drive A, enter the path
to drive A if it is not already displayed, and click OK.
The OEM Option dialog box appears.
7 If not already selected, select 3Com Fast
EtherLink/EtherLink XL PCI Busmaster NIC, and
click OK.
Windows copies files, and then the Setup Message dialog
box confirms that 3Com dRMON SmartAgent
has been successfully installed.
The name of the Windows NT server domain or
workgroup that you belong to
The IP address that you will use if your network does
not have a DHCP server (TCP/IP only)
Installed Adapters group.
Windows NT 2-7
® software