PERIODIC MAINTENANCE AND MINOR REPAIR
1
1. Screw (×2)
2. Lens
Replacing the taillight bulb
1. Remove the taillight lens by
removing the screws.
6
2
1. Bulb
2. Remove the defective bulb by
EAU03604
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
cC
Do not overtighten the screws,
otherwise the lens may break.
Supporting the machine
1
Since this model is not equipped with
a centerstand, follow these precau-
tions when removing the front and
rear wheel or performing other main-
tenance requiring the machine to
stand
machine is in a stable and level posi-
tion before starting any maintenance.
A strong wooden box can be placed
under the engine for added stability.
To service the front wheel
EC000108
6-33
upright.
Check
1. Stabilize the rear of the machine
by using a machine stand or, if
an additional machine stand is
not available, by placing a jack
under the frame in front of the
rear wheel.
2. Raise the front wheel off the
ground by using a machine
stand.
EAU01579
that
the