Yamaha TT-R Owner's Manual page 51

2
1
1. Oil filter element
2. O-ring (×3)
6. Remove the oil filter element and
O-rings.
7. Check the O-rings for damage
and replace them if necessary.
8. Clean the oil filter element with
solvent, and then install it.
NOTE:
Check the oil filter element for dam-
age and replace it if necessary.
9. Install the oil filter element cover
by installing the bolts, then tight-
ening them to the specified
torque.
PERIODIC MAINTENANCE AND MINOR REPAIR
Tightening torque:
Oil filter element cover bolt:
10 Nm
(1.0 m0kgf, 7.2 ft0lbf)
10. Install the oil filter element drain
bolt, and then tighten it to the
specified torque.
Tightening torque:
Oil filter element drain bolt:
10 Nm
(1.0 m0kgf, 7.2 ft0lbf)
NOTE:
Make sure that the O-rings are prop-
erly seated.
11. Install the engine oil drain bolt,
and then tighten it to the speci-
fied torque.
Tightening torque:
Engine oil drain bolt:
20 Nm
(2.0 m0kgf, 14.5 ft0lbf)
6-10
12. Add the specified amount of the
recommended engine oil, and
then install and tighten the oil
filler bolt.
Recommended oil:
See page 8-1.
Oil quantity:
Without oil filter element
removal:
1.1 L
(0.97 lmp qt, 1.16 US qt)
With oil filter element removal:
1.2 L
(1.06 lmp qt, 1.27 US qt)
Total amount (dry engine):
1.45 L
(1.28 lmp qt, 1.53 US qt)
6