Seat; Adjusting The Front Fork - Yamaha TT-R Owner's Manual

1
1. Bolt (×2)

Seat

To remove the seat
Remove the bolts, and then pull the
seat off.
INSTRUMENT AND CONTROL FUNCTIONS
1
2
1. Projection (×2)
2. Seat holder (×2)
EAU00240
To install the seat
1. Insert the projections on the front
of the seat into the seat holders
as shown.
2. Place the seat in the original
position, and then tighten the
bolts.
NOTE:
Make sure that the seat is properly
secured before riding.

Adjusting the front fork

The front fork is equipped with air
valves for adjusting the spring rate
and screws for adjusting the damping
force.
w
There should be no difference in
air pressure between the fork legs.
Spring rate
The total spring rate is adjusted by
changing the air pressure as follows.
1. Lift the front wheel off the ground
NOTE:
When checking and adjusting the air
pressure, there should be no weight
on the front end of the machine.
3-7
according to the procedure on
page 6-33.
EAU04834
EW000036
3