Yamaha TT-R110E Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Motorcycle
  5. TT-R110E
  6. Owner's manual

Yamaha TT-R110E Owner's Manual

Hide thumbs Also See for TT-R110E:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
Read this manual carefully before operating this vehicle.
Il convient de lire attentivement ce manuel avant la pre-
mière utilisation du véhicule.
Bitte lesen Sie diese Bedienungsanleitung sorgfältig
durch, bevor Sie das Fahrzeug in Betrieb nehmen.
MANUEL DU PROPRIÉTAIRE
BEDIENUNGSANLEITUNG
OWNER'S MANUAL
TT-R110E
TT-R110EE
5B6-28199-86

Advertisement

Table of Contents
loading

Related Manuals for Yamaha TT-R110E

Summary of Contents for Yamaha TT-R110E

  • Page 1 Read this manual carefully before operating this vehicle. Il convient de lire attentivement ce manuel avant la pre- mière utilisation du véhicule. Bitte lesen Sie diese Bedienungsanleitung sorgfältig durch, bevor Sie das Fahrzeug in Betrieb nehmen. OWNER’S MANUAL MANUEL DU PROPRIÉTAIRE BEDIENUNGSANLEITUNG TT-R110E TT-R110EE 5B6-28199-86...
  • Page 2 Original instructions Notice originale Originalbetriebsanleitung PRINTED ON RECYCLED PAPER PRINTED IN JAPAN IMPRIMÉ SUR PAPIER RECYCLÉ 2013.07-0.3×1 CR AUF RECYCLINGPAPIER GEDRUCKT (E,F,G)
  • Page 3 Read this manual carefully before operating this vehicle. OWNER’S MANUAL TT-R110E TT-R110EE 5B6-28199-86-E0...
  • Page 4 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold. EC Declaration of Conformity conforming to Directive 2006/42/EC We, YAMAHA MOTOR CO., LTD. 2500 Shingai, Iwata, Japan, declare in sole responsibility, that the product TT-R110E (JYACE17W000007308–...
  • Page 5 Yamaha has met these standards without reducing the performance or economy of operation of the motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the recommended maintenance schedules and operating instructions contained within this manual.
  • Page 6 INTRODUCTION AN IMPORTANT SAFETY MESSAGE:  Read this manual completely before operating your motorcycle. Make sure you understand all instructions.  Pay close attention to the warning and notice labels on the motorcycle.  Never operate a motorcycle without proper training or instruction. ...

  • Page 7: Important Manual Information

    IMPORTANT MANUAL INFORMATION EAU10134 Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 8 IMPORTANT MANUAL INFORMATION EAU10201 TT-R110E/TT-R110EE OWNER’S MANUAL ©2013 by Yamaha Motor Co., Ltd. 1st edition, May 2013 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd. is expressly prohibited. Printed in Japan.

  • Page 9: Table Of Contents

    TABLE OF CONTENTS LOCATION OF IMPORTANT FOR YOUR SAFETY – Spoke wheels........7-17 LABELS ..........1-1 PRE-OPERATION CHECKS ..... 5-1 Adjusting the clutch free play..7-17 Adjusting the brake lever free SAFETY INFORMATION ....2-1 OPERATION AND IMPORTANT play ..........7-18 RIDING POINTS ........ 6-1 Adjusting the brake pedal free DESCRIPTION ........3-1 Starting and warming up a cold...
  • Page 10 TABLE OF CONTENTS Troubleshooting......7-32 Troubleshooting chart ....7-34 MOTORCYCLE CARE AND STORAGE.......... 8-1 Matte color caution ......8-1 Care ..........8-1 Storage ........... 8-3 SPECIFICATIONS......9-1 CONSUMER INFORMATION ..10-1 Identification numbers....10-1...

  • Page 11: Location Of Important Labels

    Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a replacement label is available from your Yamaha dealer. For Canada...

  • Page 12: Tire Information

    LOCATION OF IMPORTANT LABELS For Canada INFORMATION SUR LES PNEUS TIRE INFORMATION La pression des pneus à froid doit normalement Cold tire normal pressure should be set as être réglée comme suit. follows. AVANT : 100kPa, {1.00kgf/cm }, 15psi FRONT : 100kPa, {1.00kgf/cm }, 15psi ARRIERE : 100kPa, {1.00kgf/cm }, 15psi...

  • Page 13: 3Pt-2118K-A1

    LOCATION OF IMPORTANT LABELS For Canada 3PT-2118K-A1 This spark ignition system meets all requirements THIS VEHICLE IS A RESTRICTED USE of the Canadian Interference Causing Equipment MOTORCYCLE AND IS NOT INTENDED FOR Regulations. USE ON PUBLIC HIGHWAYS. Ce système d’allumage par étincelle de véhicule respecte toutes les exigences du Règlement sur le CE VÉHICULE EST UNE MOTOCYCLETTE À...
  • Page 14 LOCATION OF IMPORTANT LABELS For Europe...

  • Page 15: 4Aa-22259-40

    LOCATION OF IMPORTANT LABELS For Europe TT-R110E EN16029 2013 5.4 kW 72 kg 5B6-2156A-10 YAMAHA MOTOR CO., LTD. 2500 SHINGAI, IWATA, JAPAN 5B6-2817L-00 100 kPa 100 kPa 1.00 kgf/cm² 1.00 kgf/cm² 15 psi 15 psi 5PG-2816R-00 4AA-22259-40 5B6-2816R-00...
  • Page 16 LOCATION OF IMPORTANT LABELS Familiarize yourself with the following pictograms and read the explanatory text. Read the Owner’s manual. Never use on paved roads. Always approved Never carry passengers. helmet and protective gear. Use from 6 years old. This unit contains high- Operation of this motorcycle...
  • Page 17 LOCATION OF IMPORTANT LABELS Use unleaded gasoline only. 1 Year of construction **** YAMAHA MOTOR CO., LTD. 2500 SHINGAI, IWATA, JAPAN Measure the tire pressure when the tires are cold. Adjust the tire pressure. Improper tire pressure can cause loss of control.
  • Page 18 LOCATION OF IMPORTANT LABELS For Oceania and South Africa...
  • Page 19 LOCATION OF IMPORTANT LABELS For Oceania and South Africa TIRE INFORMATION Cold tire normal pressure should be set as follows. FRONT : 100kPa, { 1.00kgf/cm } , 15psi REAR : 100kPa, {1.00kgf/cm }, 15psi 3RV-21668-A0 4AA-22259-40 3PT-2118K-A1...

  • Page 20: Safety Information

    SAFETY INFORMATION  Never operate a motorcycle with-  The failure of motorists to detect EAU4121C out proper training or instruction. and recognize motorcycles in traf- Take a training course. Beginners fic is the predominating cause of Be a Responsible Owner should receive training from a cer- automobile/motorcycle accidents.
  • Page 21 SAFETY INFORMATION  Many accidents involve inexperi-  The posture of the operator is im-  Never wear loose-fitting clothes, enced operators. portant for proper control. The op- otherwise they could catch on the • Make sure that you are qualified erator should keep both hands on control levers, footrests, or wheels and that you only lend your mo-...
  • Page 22 Yamaha accessories, which are avail-  Accessory weight should be kept you try to ventilate engine exhaust able only from a Yamaha dealer, have with fans or open windows and as low and close to the motorcy- been designed, tested, and approved doors, carbon monoxide can rap- cle as possible.
  • Page 23 SAFETY INFORMATION products or having other modifications • Bulky or large accessories may tires, rims, sizes, and combinations performed to your vehicle that change seriously affect the stability of may not be appropriate. Refer to page any of the vehicle’s design or operation the motorcycle.
  • Page 24 SAFETY INFORMATION the location for the straps carefully so the straps will not rub against painted surfaces during transport.  The suspension should be com- pressed somewhat by the tie- downs, if possible, so that the mo- torcycle will not bounce exces- sively during transport.

  • Page 25: Description

    DESCRIPTION EAU10411 Left view 1. Fuel cock (page 4-6) 2. Starter (choke) lever (page 4-7) 3. Fuse (page 7-28) 4. Battery (page 7-26) 5. Clutch adjusting screw (page 7-17) 6. Engine oil drain bolt (page 7-9) 7. Shift pedal (page 4-2) 8.

  • Page 26: Right View

    DESCRIPTION EAU10421 Right view 1. Spark arrester (page 7-13) 2. Seat (page 4-8) 3. Fuel tank (page 4-3) 4. Air filter element (page 7-11) 5. Spark plug cap (page 7-8) 6. Engine oil filler cap (page 7-9) 7. Brake pedal (page 4-3) 8.

  • Page 27: Controls And Instruments

    DESCRIPTION EAU10431 Controls and instruments 1. Engine stop switch (page 4-1) 2. Main switch (page 4-1) 3. Start switch (page 4-1) 4. Brake lever (page 4-2) 5. Throttle grip (page 7-15) 6. Fuel tank cap (page 4-3)

  • Page 28: Instrument And Control Functions

    INSTRUMENT AND CONTROL FUNCTIONS EAU40341 EWA10073 EAU1234E Main switch Handlebar switches WARNING Never turn the key to “OFF” while Left the vehicle is moving, otherwise the electrical systems will be switched off, which may result in loss of con- trol or an accident. The main switch controls the ignition 1.

  • Page 29: Shift Pedal

    INSTRUMENT AND CONTROL FUNCTIONS EAU12661 EAU39852 EAU12892 Engine stop switch “ ” Shift pedal Brake lever Set this switch to “ ” before starting the engine. Set this switch to “ ” to stop the engine in case of an emergen- cy, such as when the vehicle overturns or when the throttle cable is stuck.

  • Page 30: Brake Pedal

    INSTRUMENT AND CONTROL FUNCTIONS EAU12942 EAU13183 EAU13213 Brake pedal Fuel tank cap Fuel Make sure there is sufficient gasoline in the tank. EWA10882 WARNING Gasoline and gasoline vapors are extremely flammable. To avoid fires and explosions and to reduce the risk of injury when refueling, follow these instructions.
  • Page 31 Handle gaso- 0.5 L (0.13 US gal, 0.11 Imp.gal) line with care. Never siphon gasoline Your Yamaha engine has been de- by mouth. If you should swallow signed to use regular unleaded gaso- some gasoline or inhale a lot of gas-...
  • Page 32 3.8 L (1.00 US gal, 0.84 Imp.gal) as well as to the exhaust system. Fuel reserve amount: 0.5 L (0.13 US gal, 0.11 Imp.gal) Your Yamaha engine has been de- signed to use regular unleaded gaso- ECA11401 NOTICE line with a research octane number of 95 or higher.

  • Page 33: Fuel Tank Breather Hose

    INSTRUMENT AND CONTROL FUNCTIONS EAU13414 EAU13562 Fuel tank breather hose Fuel cock The fuel cock supplies fuel from the tank to the carburetor while filtering it also. The fuel cock has three positions: 1. Arrow mark positioned over “ON” 1. Fuel tank breather hose With the lever in this position, fuel flows Before operating the motorcycle: to the carburetor.

  • Page 34: Starter (Choke) Lever

    INSTRUMENT AND CONTROL FUNCTIONS This indicates reserve. If you run out of EAU13591 EAU37651 Starter (choke) lever “ ” Kickstarter fuel while riding, move the lever to this position. Fill the tank at the first oppor- tunity. Be sure to set the lever back to “ON”...

  • Page 35: Seat

     Do not dispose of a damaged or seat holder as shown. worn-out shock absorber as- sembly yourself. Take the shock absorber assembly to a Yamaha dealer for any service.

  • Page 36: Sidestand

    INSTRUMENT AND CONTROL FUNCTIONS EAU37491 EAU41612 Sidestand Starting circuit cut-off system The sidestand is located on the left The starting circuit cut-off system pre- side of the frame. Raise the sidestand vents starting when the transmission is or lower it with your foot while holding in gear.
  • Page 37 With the engine turned off: 1. Make sure that the engine stop switch is set to “ ”. If a malfunction is noted, have a Yamaha 2. Turn the key to “ON”. dealer check the system before riding. 3. Shift the transmission into gear.

  • Page 38: For Your Safety - Pre-Operation Checks

    7-19, 7-20 • Adjust if necessary. • Make sure that operation is smooth. • Check throttle grip free play. Throttle grip 7-15, 7-23 • If necessary, have Yamaha dealer adjust throttle grip free play and lubricate ca- ble and grip housing.
  • Page 39 FOR YOUR SAFETY – PRE-OPERATION CHECKS ITEM CHECKS PAGE • Make sure that operation is smooth. 7-23 Control cables • Lubricate if necessary. • Check chain slack. • Adjust if necessary. Drive chain 7-21, 7-22 • Check chain condition. • Lubricate if necessary. •...

  • Page 40: Operation And Important Riding Points

    1. Turn the fuel cock lever to “ON”. (choke) turned off. there is a control or function you do not 2. Turn the key to “ON” and make understand, ask your Yamaha dealer. sure that the engine stop switch is ECA11043 NOTICE EWA10272 set to “...

  • Page 41: Starting A Warm Engine

    OPERATION AND IMPORTANT RIDING POINTS EAU16641 EAU39902 ECA15442 Starting a warm engine Shifting NOTICE Follow the same procedure as for  Even with the transmission in starting a cold engine with the excep- the neutral position, do not tion that the starter (choke) is not re- coast for long periods of time quired when the engine is warm.

  • Page 42: Engine Break-In

    Since the engine is brand new, do not shifting to the next higher gear. during the engine break-in period, put an excessive load on it for the first immediately have a Yamaha dealer 5 hours of operation. The various parts EAU16711 check the vehicle.

  • Page 43: Parking

    OPERATION AND IMPORTANT RIDING POINTS EAU17172 Parking When parking, stop the engine, re- move the key from the main switch, and then turn the fuel cock lever to “OFF”. EWA10312 WARNING  Since the engine and exhaust system can become very hot, park in a place where pedestri- ans or children are not likely to touch them and be burned.

  • Page 44: Periodic Maintenance And Adjustment

    To avoid possible burns, let tivities incorrectly may increase brake components cool before your risk of injury or death during touching them. service or while using the vehicle. If you are not familiar with vehicle ser- vice, have a Yamaha dealer perform service.

  • Page 45: Owner's Tool Kit

    If you do not have the tools or experi- ence required for a particular job, have a Yamaha dealer perform it for you.

  • Page 46: Periodic Maintenance Chart For The Emission Control System

     From 7000 km (4200 mi) or 18 months, repeat the maintenance intervals starting from 3000 km (1800 mi) or 6 months.  Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and tech- nical skills.

  • Page 47: General Maintenance And Lubrication Chart

     From 7000 km (4200 mi) or 18 months, repeat the maintenance intervals starting from 3000 km (1800 mi) or 6 months.  Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and tech- nical skills.
  • Page 48 • Replace if necessary. • Check operation and for oil leakage. Shock absorber assem- √ 15 * • Replace if necessary. • Apply Yamaha chain and cable lube or engine oil thor- √ √ √ 16 * Control cables oughly.
  • Page 49 PERIODIC MAINTENANCE AND ADJUSTMENT EAU40001 The air filter needs more frequent service if you are riding in unusually wet or dusty areas.

  • Page 50: Removing And Installing Panels

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU18772 Removing and installing pan- The panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a panel needs to be removed and installed. 1.

  • Page 51: Checking The Spark Plug

    If the spark plug shows a distinctly dif- ferent color, the engine could be oper- ating improperly. Do not attempt to diagnose such problems yourself. In- stead, have a Yamaha dealer check 1. Spark plug cap the vehicle. 2. Remove the spark plug as shown, with the spark plug wrench includ- ed in the owner’s tool kit.

  • Page 52: Engine Oil

    PERIODIC MAINTENANCE AND ADJUSTMENT 2. Check the spark plug for electrode To install the spark plug EAU39846 Engine oil erosion and excessive carbon or 1. Clean the surface of the spark The engine oil level should be checked other deposits, and replace it if plug gasket and its mating sur- before each ride.
  • Page 53 PERIODIC MAINTENANCE AND ADJUSTMENT 3. Remove the engine oil filler cap, Recommended engine oil: the engine oil drain bolt and its See page 9-1. gasket to drain the oil from the Oil change quantity: 0.80 L (0.85 US qt, 0.70 Imp.qt) crankcase.

  • Page 54: Cleaning The Air Filter Element

    Use only a dedicated parts cleaning solvent. To avoid the Recommended oil: risk of fire or explosion, do not Yamaha foam air filter oil or other use gasoline or solvents with a quality foam air filter oil NOTICE: low flash point.
  • Page 55 PERIODIC MAINTENANCE AND ADJUSTMENT mesh and the sponge material 2. If dirt or water is visible, remove installed, otherwise the pis- the hoses, clean them, and then ton(s) and/or cylinder(s) may reinstall them. become excessively worn. [ECA15573] 1. Spark plug lead 2.

  • Page 56: Cleaning The Spark Arrester

    PERIODIC MAINTENANCE AND ADJUSTMENT 3. Insert the tailpipe into the muffler, EAU40422 Cleaning the spark arrester and then install and tighten the The spark arrester should be cleaned bolts to the specified torque. at the intervals specified in the periodic maintenance and lubrication chart.

  • Page 57: Adjusting The Carburetor

    Therefore, most checked and, if necessary, adjusted as carburetor adjustments should be left follows at the intervals specified in the to a Yamaha dealer, who has the nec- periodic maintenance and lubrication essary professional knowledge and ex- chart.

  • Page 58: Checking The Throttle Grip Free Play

    Therefore, it must be adjusted by a Yamaha dealer is essential to maintain the tires in good at the intervals specified in the periodic condition at all times and replace them maintenance and lubrication chart.
  • Page 59 Yamaha dealer  It is not recommended to patch replace the tire immediately. a punctured tube. If unavoid-...

  • Page 60: Spoke Wheels

    If any damage is found, have a Yamaha dealer re- place the wheel. Do not attempt even the smallest repair to the 1. Locknut wheel.

  • Page 61: Adjusting The Brake Lever Free Play

    PERIODIC MAINTENANCE AND ADJUSTMENT decrease the brake lever free play, EAU44885 Adjusting the brake lever free turn the adjusting bolt in direction When tightening the locknut, hold the play (b). clutch adjusting screw with a screw- driver so that it does not turn together with the locknut.

  • Page 62: Adjusting The Brake Pedal Free Play

     If proper adjustment cannot be obtained as described, have a Yamaha dealer make this ad- justment. 1. Locknut 2. Brake lever free play adjusting bolt 7. Tighten the locknut at the brake 1.

  • Page 63: Checking The Shift Pedal

    If opera- lubrication chart. Each brake is provid- Front tion is not smooth, have a Yamaha ed with a wear indicator, which allows dealer check the vehicle. you to check the brake shoe wear with- out having to disassemble the brake.

  • Page 64: Drive Chain Slack

    EAU40115 2. Shift the transmission into the To adjust the drive chain slack neutral position. Consult a Yamaha dealer before ad- 3. Measure the drive chain slack as justing the drive chain slack. shown. 1. Loosen the brake pedal free play...

  • Page 65: Cleaning And Lubricating The Drive

    60 Nm (6.0 m·kgf, 43 ft·lbf) For a thorough cleaning, have a Locknut: 7 Nm (0.7 m·kgf, 5.1 ft·lbf) Yamaha dealer remove the drive chain and soak it in solvent. 4. Adjust the brake pedal free play. 2. Spray Yamaha chain lubricant or (See page 7-19.)

  • Page 66: Checking And Lubricating The Cables

    Yamaha dealer at the intervals cated if necessary. If a cable is specified in the periodic maintenance damaged or does not move smoothly, chart.

  • Page 67: Checking And Lubricating The Brake Pedal

    The operation of the sidestand should The swingarm pivots must be lubricat- be checked before each ride, and the ed by a Yamaha dealer at the intervals sidestand pivot and metal-to-metal specified in the periodic maintenance contact surfaces should be lubricated and lubrication chart.

  • Page 68: Checking The Front Fork

    WARNING! To avoid injury, of it falling over. have a Yamaha dealer check or re- [EWA10752] securely support the vehicle so 2. Hold the lower ends of the front pair it.

  • Page 69: Checking The Wheel Bearings

    (See page 7-7.) hub or if the wheel does not turn This model is equipped with a VRLA smoothly, have a Yamaha dealer (Valve Regulated Lead Acid) battery. check the wheel bearings. There is no need to check the electro- lyte or to add distilled water.
  • Page 70 3. Fully charge the battery before in- stallation. NOTICE: When install- To charge the battery Have a Yamaha dealer charge the bat- ing the battery, be sure the key tery as soon as possible if it seems to is turned to “OFF” before con- have discharged.

  • Page 71: Replacing The Fuse

    6. If the fuse immediately blows fore starting any maintenance. A again, have a Yamaha dealer strong wooden box can be placed un- check the electrical system. der the engine for added stability.

  • Page 72: Front Wheel

    PERIODIC MAINTENANCE AND ADJUSTMENT a jack either under each side of the 3. Loosen the axle nut. EAU24361 Front wheel frame in front of the rear wheel or under each side of the swingarm. EAU56490 To remove the front wheel EWA10822 WARNING To avoid injury, securely support the...
  • Page 73 PERIODIC MAINTENANCE AND ADJUSTMENT To install the front wheel 5. Tighten the axle nut to the speci- 1. Install the brake shoe assembly fied torque. into the wheel hub. Tightening torque: 2. Lift the wheel up between the fork Axle nut: legs.

  • Page 74: Rear Wheel

    PERIODIC MAINTENANCE AND ADJUSTMENT 2. Remove the brake pedal free play EAU25081 Rear wheel adjusting nut, and then discon- nect the brake rod at the brake EAU56800 camshaft lever. To remove the rear wheel EWA10822 WARNING To avoid injury, securely support the vehicle so there is no danger of it 1.

  • Page 75: Troubleshooting

    The drive chain does not need to be self. However, should your motorcycle Tightening torque: disassembled in order to remove and require any repair, take it to a Yamaha Brake torque rod nut: install the wheel. 26 Nm (2.6 m·kgf, 19 ft·lbf)
  • Page 76 PERIODIC MAINTENANCE AND ADJUSTMENT heaters or furnaces. Gasoline or gasoline vapors can ignite or ex- plode, causing severe injury or prop- erty damage. 7-33...

  • Page 77: Troubleshooting Chart

    Remove the spark plug and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the compression. 4. Compression The engine does not start. There is compression.

  • Page 78: Motorcycle Care And Storage

    Some models are equipped with matte colored finished parts. Be ble. Rust and corrosion can develop Cleaning sure to consult a Yamaha dealer for even if high-quality components are ECA10773 NOTICE used. A rusty exhaust pipe may go un-...
  • Page 79 MOTORCYCLE CARE AND STORAGE off any detergent residue using shield. Test the product on a 2. Apply a corrosion protection spray plenty of water, as it is harmful small hidden part of the wind- on all metal, including chrome- to plastic parts. shield to make sure that it does and nickel-plated, surfaces to pre- ...

  • Page 80: Storage

    MOTORCYCLE CARE AND STORAGE 8. Let the motorcycle dry completely EAU26153 Storage before storing or covering it. Consult a Yamaha dealer for advice on EWA14502 what products to use. Short-term WARNING Always store your motorcycle in a cool, Contaminants on the brakes or tires dry place and, if necessary, protect it can cause loss of control.
  • Page 81 MOTORCYCLE CARE AND STORAGE 2. For motorcycles equipped with a WARNING! To prevent dam- cessively cold or warm place [less fuel cock that has an “OFF” posi- than 0 °C (30 °F) or more than 30 age or injury from sparking, tion: Turn the fuel cock lever to make sure to ground the °C (90 °F)].

  • Page 82: Specifications

    SPECIFICATIONS Dimensions: Vibration on handlebar (EN1032, ISO5008): 10 30 50 70 90 110 130 ˚F TT-R110E Will not exceed 2.5 m/s² Overall length: (AUT)(BEL)(CHE)(CYP)(CZE)(DEU)(DNK) 1565 mm (61.6 in) SAE 10W-30 (ESP)(FIN)(FRA)(GBR)(GRC)(IRL)(ITA)(NLD) Overall width: SAE 10W-40 (NOR)(POL)(PRT)(SVK)(SVN)(SWE)(TUR) 680 mm (26.8 in)
  • Page 83 SPECIFICATIONS Spark plug(s): Trail: Rear wheel: 60 mm (2.4 in) Manufacturer/model: Wheel type: Front tire: NGK/CR6HSA Spoke wheel Spark plug gap: Type: Rim size: 0.6–0.7 mm (0.024–0.028 in) With tube 12x1.60 Clutch: Size: Front brake: 2.50-14 4PR Clutch type: Type: Manufacturer/model: Wet, multiple-disc and centrifugal Drum brake...
  • Page 84 SPECIFICATIONS Battery: EAU51132 Model: For Europe only GT4B-5 Voltage, capacity: The figures quoted are emission levels 12 V, 2.5 Ah and are not necessarily safe working Fuse: levels. Whilst there is a correlation be- Fuse: tween the emission and exposure lev- 10.0 A els, this cannot be used reliably to determine whether or not further pre-...

  • Page 85: Consumer Information

    Record the vehicle identification num- ber and model label information in the spaces provided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehicle is stolen. VEHICLE IDENTIFICATION NUMBER: 1. Vehicle identification number 1.
  • Page 86 CONSUMER INFORMATION EAU48121 Vehicle Emission Control Informa- tion label (For Canada) 1. Vehicle Emission Control Information label The Vehicle Emission Control Informa- tion label is affixed at the location in the illustration. This label shows specifica- tions related to exhaust emissions as required by federal law, state law and Environment Canada.
  • Page 87 INDEX Starting circuit cut-off system ....4-9 Start switch..........4-2 Air filter element, cleaning ....7-11 Handlebar switches ....... 4-1 Steering, checking ........ 7-25 Storage ........... 8-3 Battery ..........7-26 Identification numbers ......10-1 Supporting the motorcycle ....7-28 Brake lever..........4-2 Swingarm pivots, lubricating ....
  • Page 88 EAU53772 WARNING Improper motorcycle use can result in SEVERE INJURY or DEATH. NEVER CARRY ALWAYS USE NEVER USE PASSENGERS AN APPROVED ON PAVED HELMET AND ROADS PROTECTIVE GEAR NEVER ALWAYS operate: • without proper training or instruction. • use proper riding techniques to avoid •...

This manual is also suitable for:

Tt-r110ee

Table of Contents