Starting Circuit Cut-Off System - Yamaha TT-R Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
NOTE:
Although the total number of clicks of
a damping force adjusting mecha-
nism may not exactly match the
above specifications due to small dif-
ferences in production, the actual
number of clicks always represents
3
the entire adjusting range. To obtain
a precise adjustment, it would be
advisable to check the number of
clicks of each damping force adjust-
ing mechanism and to modify the
specifications as necessary.
w
This shock absorber
highly pressurized nitrogen gas.
For proper handling, read and
understand the following informa-
tion before handling the shock
absorber. The manufacturer can-
not be held responsible for proper-
ty damage or personal injury that
may result from improper han-
dling.
8 Do not tamper with or attempt
to open the gas cylinder.
8 Do not subject the shock
absorber to an open flame or
other high heat sources, other-
wise it may explode due to
excessive gas pressure.
8 Do not deform or damage the
gas cylinder in any way, as
this will result in poor damp-
ing performance.
8 Always have a Yamaha dealer
service the shock absorber.
3-12
EAU00315
Starting circuit cut-off
system
contains
The starting circuit cut-off system
(comprising the clutch switch and the
neutral switch)
when the transmission is in gear and
the clutch lever is not pulled.
Periodically check the operation of
the starting circuit cut-off system
according to the following procedure.
w
If a malfunction is noted, have a
Yamaha dealer check the system
before riding.
EAU04364
prevents starting
EW000045