To service the rear wheel
Raise the rear wheel off the ground by
using a motorcycle stand or, if a motor-
cycle stand is not available, by placing
a jack either under each side of the
frame in front of the rear wheel or under
each side of the swingarm.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Front wheel axle pinch bolt (× 4)
Front wheel
To remove the front wheel
WARNING
_
G
It is advisable to have a Yamaha
dealer service the wheel.
G
Securely support the motor-
cycle so that there is no danger
of it falling over.
_
1. Loosen the axle bolt, the wheel
axle pinch bolts, and then the
brake caliper bolts.
6-46
1. Brake hose holder
2. Brake caliper
EAU04956
3. Axle bolt
4. Bolt (× 3)
2. Lift the front wheel off the ground
according to the procedure on
EW000122
page 6-45.
3. Remove the brake hose holder on
each side by removing the bolt.
4. Remove the brake caliper on each
side by removing the bolts.
6