Yamaha YZF-R6 Owner's Manual page 23

Immobilizer system indicator light
" "
The electrical circuit of the indicator
light can be checked by turning the key
to "ON".
If the indicator light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical cir-
cuit.
When the key is turned to "OFF" and
30 seconds have passed, the indicator
light will start flashing indicating the im-
mobilizer system is enabled. After
24 hours have passed, the indicator
light will stop flashing, however the im-
mobilizer system is still enabled.
NOTE:
_
This model is also equipped with a self-
diagnosis device for the immobilizer
system. If the immobilizer system is de-
fective, the indicator will start flashing
and the multi-function meter will display
an error code. (See "Self-diagnosis de-
vice" on page 3-9 for details.)
_
INSTRUMENT AND CONTROL FUNCTIONS
EAU04972*
1. Shift timing indicator light
2. Coolant temperature warning light "
3. Coolant temperature display
Shift timing indicator light
This indicator light can be set to come
on and go off at the desired engine
speeds and is used to inform the rider
when it is time to shift to the next higher
gear.
The electrical circuit of the indicator
light can be checked by turning the key
to "ON".
If the indicator light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical cir-
cuit. (See pages 3-10–3-12 for a de-
tailed explanation of the function of this
indicator light and on how to set it.)
Coolant temperature warning light
"
"
This warning light comes on when the
engine overheats. When this occurs,
EAU04975
stop the engine immediately and allow
the engine to cool.
The electrical circuit of the warning light
can be checked by turning the key to
"ON".
If the warning light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical cir-
cuit.
CAUTION:
_
Do not operate the engine if it is
overheated.
_
3-6
"
EAU04923
3
EC000002