Catalytic Converter; Seats - Yamaha YZF-R6 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Catalytic converter

This motorcycle is equipped with a cat-
alytic converter in the exhaust cham-
ber.
WARNING
_
The exhaust system is hot after op-
3
eration. Make sure that the exhaust
system has cooled down before do-
ing any maintenance work.
_
CAUTION:
_
The following precautions must be
observed to prevent a fire hazard or
other damages.
G
Use only unleaded gasoline.
The use of leaded gasoline will
cause unrepairable damage to
the catalytic converter.
G
Never park the motorcycle near
possible fire hazards such as
grass or other materials that
easily burn.
G
Do not allow the engine to idle
too long.
_
EAU01084
EW000128
1. Bolt (× 2)

Seats

EC000114
Rider seat
To remove the rider seat
Pull up the rear corners of the rider seat
as shown, remove the bolts, and then
pull the seat off.
1. Projection
2. Seat holder
EAU03814
To install the rider seat
Insert the projection on the front of the
rider seat into the seat holder as
shown, place the seat in the original
position, and then install the bolts.
3-19