Replacing The Fuses - Yamaha Diversion 900 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Fuse box ( 2)

Replacing the fuses

The fuse boxes are located behind
cowling B. (See page 6-6 for cowling
removal and installation procedures.)
6
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
1. Headlight fuse
2. Ignition fuse
EAU01110
3. Clock fuse
4. Hazard fuse
5. Main fuse
6. Spare fuse ( 3)
7. Signaling system fuse
Specified fuses:
Main fuse:
Headlight fuse:
Signaling system fuse:
Ignition fuse:
Clock fuse:
Hazard fuse:
CAUTION:
@
Do not use a fuse of a higher amper-
age rating than recommended to
avoid causing extensive damage to
the electrical system and possibly a
fire.
@
3. Turn the key to "ON" and turn on
4. If the fuse immediately blows
30 A
15 A
20 A
10 A
10 A
10 A
6-29
the electrical circuit in question to
check if the device operates.
again, have a Yamaha dealer
check the electrical system.
EC000103