Rear Wheel - Yamaha Diversion 900 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Wheel axle pinch bolt

Rear wheel

To remove the rear wheel
6
WARNING
@
It is advisable to have a Yamaha
dealer service the wheel.
Securely support the motor-
cycle so that there is no danger
of it falling over.
@
1. Axle nut
1. Loosen the rear wheel axle pinch
EAU03410
bolt, and then remove the axle nut.
2. Place the motorcycle on the
centerstand.
EW000122
1. Nut
2. Brake torque rod
3. Cotter pin
4. Bolt ( 2)
3. Remove the brake caliper bolts
4. Disconnect the brake torque rod
5. While supporting the brake cali-
6. Pull the wheel to the right to sepa-
6-33
and the axle nut.
from the brake caliper bracket by
removing the cotter pin, the nut,
and the bolt.
per, pull the wheel axle out.
rate it from the final gear case, and
then remove it.