INSTRUMENT AND CONTROL FUNCTIONS
3
1. Seat lock
2. Unlock.
Seat
To remove the seat
Insert the key into the seat lock, turn it
counterclockwise, and then pull the
seat off.
1. Projection ( 2)
2. Seat holder
To install the seat
EAU02925
Insert the projections on the front of the
seat into the seat holder, push the rear
of the seat down to lock it in place, and
then remove the key.
NOTE:
@
Make sure that the seat is properly se-
cured before riding.
@
1. Helmet holder
Helmet holder
The helmet holder is located under the
seat.
To secure a helmet to the helmet
holder
1. Remove the seat.
2. Attach the helmet to the helmet
3-11
holder, and then securely install
the seat.
EAU00263*