Lubrication Points - Yamaha XA1200Ltd WaveRunner Owner's/Operator's Manual

NOTE:
● Before installing the spark plug cap, be
sure to wipe off any water on the spark
plug or inside the cap. Push the spark
plug cap down until it clicks.
● If a torque wrench is not available when
fitting a new spark plug, good estimate of
the correct torque is 1/4 to 1/2 a turn past
finger-tight. Have the spark plug adjusted
to the correct torque as soon as possible
with a torque wrench.
EWJ00088
WARNING
When removing or installing a spark
plug, be careful not to damage the insu-
lator. A damaged insulator could allow
external sparks, which could lead to
explosion or fire.
EJU00553a

LUBRICATION POINTS

Coat the moving parts that are sliding or
rotating with the water resistant grease to
keep them move smoothly.
Recommended water resistant grease:
Yamaha marine grease
● Throttle cable (carburetor side)
● Oil pump cable
● Throttle cable (handlebar side)
Squeeze the throttle lever and remove the
seal . Spray a rust-inhibitor into the outer
cable. Refit the seal securely.
4-15
E