Lubrication Points - Yamaha WaveRunner SuperJet 2009 Owner's/Operator's Manual

EJU34401

Lubrication points

To keep moving parts sliding or rotating
smoothly, coat them with water-resistant
grease.
Recommended water-resistant grease:
Yamaha Marine Grease/Yamaha
Grease A
Throttle cable (carburetor end)
G
Choke cable (carburetor end)
G
Throttle cable (handlebar end)
G
Squeeze the throttle lever and remove the
seal. Spray a rust inhibitor into the outer ca-
ble. Refit the seal securely.
1 Seal
Steering cable ball joint (handlebar end)
G
Steering cable inner wire (handlebar end)
G
(1) To access the steering cable and ball
joint, remove the steering pad by re-
moving the two bolts.
Maintenance and care
(2) Grease the steering cable ball joints,
both at the handlebar end of the cable
and at the jet thrust nozzle end.
(3) Extend the steering cable inner wire,
and then apply a thin coat of grease to
the inner wire, both at the handlebar
end of the cable and at the jet thrust
nozzle end.
Steering cable ball joint (jet thrust nozzle
G
end)
Steering cable inner wire (jet thrust nozzle
G
end)
Handlebar pivot shaft
G
Lubrication of the handlebar pivot shaft re-
quires disassembly of steering compo-
56