Belt
width
Spacer
position
2 spacers between
ESU00164
DRIVE V-BELT REPLACEMENT
•
Be sure there are 2 spacers 1 between secondary
fixed and sliding sheaves when installing the NEW
belt.
If there is no gap, the clutch engagement speed will
be reduced. The machine may move unexpectedly
when the engine is started.
•
The spacer adjustment of the secondary sheave
should be serviced by a Yamaha dealer.
Serious injury can occur from sudden release of
spring tension during sheave disassembly.
805-030
CAUTION :
To ensure proper clutch performance, the spacers in
the secondary clutch must be repositioned as the V-
belt wears.
For this adjustment, consult a Yamaha dealer.
35 mm (1.38 in)
sheaves
New belt width
Belt wear limit width
WARNING
34 mm (1.34 in)
1 spacer between
sheaves
8-11
33 mm (1.30 in)
No spacer between
sheaves
35 mm (1.38 in)
32 mm (1.26 in)