Handlebar Adjustment - Yamaha VK540EG Owner's Manual

ESU00201

HANDLEBAR ADJUSTMENT

1. Remove the handlebar cover 1.
2. Loosen the handlebar bolts. Move the handlebar
assembly up or down to adjust the handlebar height to
the desired position.
3. Tighten the handlebar bolts and install the handlebar
845-026
cover.
Handlebar bolt tightening torque:
15 Nm (1.5 m·kg, 11 ft·lb)
819-077
CAUTION :
Be sure the small gap 1 side of the holder faces
forward 2.
819-040
845-012
8-21