Call Forward; Call Transfer; Conference Call - VTech Cordless Telephone Manual

Handset Operation

Call Forward

• A Handset (HS1), on an external call
can forward it to the other Handset
(HS2), by pressing and holding the
INTERCOM key. The display of HS1 will
initially show:
• The other Handset (HS2) can Press ON,
SPEAKERPHONE or any dialing keys
to answer the call.
NOTE: If the other Handset (HS2) does not
respond in about 30 seconds, the ex-
ternal call will be returned to the Hand-
set (HS1) and the display will show
CALL BACK:
If the returned call is not answered
within 30 seconds, the external call will
end automatically.

Call Transfer

• A Handset (HS1), on an external call can transfer it to the other Handset (HS2),
by pressing the INTERCOM key.
NOTE: The external call is put on hold automatically.
• Destination Handset (HS2) will ring, showing an intercom call.
• Pressing ON on the destination Handset (HS2) will answer the intercom call.
These two handsets (HS1 and HS2) can discuss the external call.
• Press OFF on the first Handset (HS1), to transfer the external call to the other
Handset. The destination Handset (HS2) is now on the external call. CALL
TRANSFERRED will briefly display on the first Handset (HS1) briefly.
NOTE: If there is no answer on the destination Handset (HS2), then HS1 can be
reconnected to the held call by pressing ON to reconnect to the external call.

Conference Call

It is possible to establish a conference
between two Handsets and the exter-
nal line.
If a Handset already has a connec-
tion to the external line, and the other
Handset presses ON or SPEAKER-
PHONE, a conference is immediately
established. Both Handsets will show:
CALL FORWARDED
CALL BACK
00:00:25
CONF.
12