Phonebook Operation; Storing A New Entry - VTech Cordless Telephone Manual

Phonebook Operation

The ev 2625 can store up to 50 numbers with names in memory. Each memory
location can hold up to 32 digits for the number and up to 16 characters for the
name.
NOTE: The Handsets share a common phonebook, which is stored in the base station.
This means that entries inserted by one Handset are available for both Handsets, and if
one deletes a phonebook entry, it will disappear from both Handsets.
When one handset (HS1) is accessing the phonebook, the other handset (HS2)cannot
access it at the same time. If this is attempted, NOT AVAILABLE AT THIS TIME will
display on the other handset (HS2).
The phonebook is accessed as follows:
• Press SEL, to enter the menu.
• Press SEL again to enter the
phonebook sub-menu.

Storing a New Entry

• After following the steps on page 15
to enter the phonebook sub-menu.
Press or to scroll to STORE,
then press SEL.
The phonebook is entered via the menu
as described below or by pressing the
key in idle mode (quick access key). The
Handset will jump directly to the
phonebook review mode.
NOTE: If the phonebook is full, the Handset
will display PHONEBOOK IS FULL and
return to the phonebook sub-menu.
NOTE: If there are no entries in the
phonebook, when it is accessed,
PHONEBOOK IS EMPTY will display.
• Enter the number you want to store in
memory. Press and hold REDIAL/
PAUSE to add pauses if necessary.
Press DEL key to backspace.
You can also press REDIAL/PAUSE,
then or to scroll to the previously
dialed number from the redial list
which you want to store in the
phonebook. Press SEL.
>PHONE BOOK
CALL LOG
>REVIEW
STORE
>STORE
REVIEW
PHONE BOOK
IS FULL
ENTER NUMBER
123-3457_
14