Clear Message Waiting; Dial Type - VTech Cordless Telephone Manual

Handset Settings

Clear Message Waiting

If, after reviewing all new voice mail
messages, the Message Waiting alert still
remains on the screen and the
on Base is still flashing, you can manually
remove the indication from the screen and
turn the LED off.
• From the idle (OFF) mode, press SEL
then or key to CLEAR MSG
WAIT.
• Press SEL then the display will ask
you TURN INDICATOR OFF? Press
SEL again to confirm with confirmation
tone. To exit, press OFF.
Dial Type (preset to Tone)
• From the idle (OFF) mode, press SEL
then or key to DIAL TYPE.
• Press SEL then use
scroll to TONE or PULSE.
• Press SEL to confirm your setting.
NOTE: When the phone is set for pulse
dial mode, it is possible to switch to
temporary tone mode during an
ongoing call by pressing
pressed, tone will be used for rest of
the call. After you hang up, the phone
will return to pulse dialing for the next
call.
LED
>CLEAR
DIAL
TURN INDICATOR
>DIAL TYPE
or key to

DIAL TYPE

PULSE
. Once
23
MSG WAIT
TYPE
OFF?
PHONE BOOK