Handset Operation
Call Forward
• While on an external call, one handset (HS1)
can forward it to any other handset:
•
Press INT on HS, it will display:
•
Enter the handset number you wish to for-
ward, HS will display:
HS X can press ON to answer the call.
•
Note: If HS X does not respond in about 30
seconds, the external call will be returned to
HS and the display will show:
If the returned call is not answered within 30
seconds, the external call will end automati-
cally.
Conference Call
It is possible to establish a conference between
two handsets and the external line.
If a handset already has a connection to the
external line, and another handset goes off-
hook, a conference is immediately established.
Both handsets will show:
Base Operation
From the base unit, you can use the PAGE key
to locate the handsets.
• When the handset is in idle, press PAGE.
The handsets will display:
• To end the page at the handset, press ON,
SPEAKER or any dialing keys.
• To end the page at the base, press PAGE.
ENTER HANDSET #
CALL FORWARDED
CALL BACK
CONF.
5
00:00:25
BASE IS
PAGING