Cd/Mp3/Wma Operation - VIETA CDV7200BT Owner's Manual

17. CD/MP3/WMA OPERATION

When a DISC or USB or MEMORY CARD is inserted into the player, the following picture will appear
on the TFT monitor.
CD Audio Disc
SELECTIING A TRACK / FILE TO PALY
Press the TRACK/FILE UP (
advance to the next track on the CD, The selected track number will appear on the display. Press
and Hold TRACK UP (
fast backword through the disc. Playback starts when the button is released.
When the last track/file playback completed, the unit will automatically enter into 'STOP'
mode. User can press play button to start the playback again when in the 'STOP' mode.
MP3/WMA FILE /FOLDER SEARCHING
1.
When a DISC or
contained on the device will automatically start playback.
2. Use the cursor 'Up' keys on the remote, to select a folder and press 'OK', the folder is
opened and the content will be displayed.
3. Use cursor 'Up' or 'Down' to navigate between the file list and press 'OK' to confirm to
play the selected file.
ID3 Information
The player can display ID3 information (Name, Album, Artist, Copyright¡- ).If this information is
not available then display company information(i.e. name etc.) Extended information will be
scrolling at the bottom of the TFT screen (only on the externally connected TFT screen).
) or TRACK /FILE DOWN (
) or TRACK DOWN (
USB or MEMORY CARD
E - 34
MP3/WMA Music Files
) button for less than one second to
) button for more than one second to fast forward or
is inserted into the player, The first music file