Dual Zone Operation - VIETA CDV7200BT Owner's Manual

11. DUAL ZONE OPERATION

"2-Zone" Dual A/V Zone Multi Entertainment Operation:
This unit is equipped with the most advance "Dual A/V Zone" feature. This function is useful if the
user would like to select different modes of the Audio and Video (AV) output source for Front and
Rear Speakers and TFT Screens. For example, user can select to listen to Tuner music for front
speakers and rear speaker for DVD movie. And if the user has One or more TFT screens installed
in the rear seat or inside the Car, the Dual A/V Zone function allow the users to enjoy TWO
different Video sources. For example, on the front in-dash Built-In TFT screen can display the
video from the Game Console and the other screen in the rear seat can display video from DVD
Movie or other A/V source. The detail operation as follow:
On/Off operation
"Off" is the default setting.
Long press the "2-Zone" button on the control panel or remote control to switch between
Dual Zone On or Off. The "2-Zone" will appear on the LCD after Dual Zone is selected "on".
To Select Front / Rear AV Sources
Once "ON" is selected, Short Press the "AUDIO" button repeatedly to change between the
F-Zone (Front ) and the R-Zone (Rear) sources.
If Front Zone "F-Zone" is selected, user have 10 seconds to use the Volume UP / DOWN
button to navigate through different modes:
Tuner > DVD > AV - 1 are available for selection for Front AV Output.
If Rear Zone "R-Zone" is selected, user have 10 seconds to use the Volume UP / DOWN
button to navigate through different modes:
Tuner > DVD > AV - 1 are available for selection for Rear AV Output
If no selection is being made within 5 seconds, the unit will resume to the pervious mode.
To operates function of Front / Rear Sources
The Front Panel & Remote control, is defaulted to control the FRONT source's function /
operation.
When DUAL ZONE is turned "ON", the Mode button is used to change between the Front
Source & Rear Source. Press the mode button repeatedly to change between Front and
The LCD will display the Rear Source mode for 10 seconds. User has 10 seconds to make
the desired operation on the Rear Source's function on the Front Panel or Remote
The LCD will automatically switch back to the Front Source after 10 seconds. And the Front
Panel and Remote now is resumed to operate for Front Source's function again.
The default setting when Dual Zone is "ON"
When DUAL ZONE is turned on, the audio output will be muted for about 1 second.
The default source / mode for Front ZONE is Tuner & for Rear ZONE is "DVD"
The default Volume level is "12" for both Front & Rear ZONE audio output. (or the Volume
Level set as VOL PGM Level set in the Menu)
The LCD display is defaulted to display the Front Mode.
When Dual Zone is "ON", some of the AUDIO FUNCTION WILL NOT BE FUNCTIONAL, THESE
FUNCTION ARE: Bass / Treble / Middle / Balance / Fader / Sub-woofer / iX-bass
The default setting when Dual Zone is in "OFF" mode
The default audio output reverts to what the user selected for the FRONT Zone source
when DUAL ZONE IS "OFF". For example: When the DUAL Zone is "ON ", user has
selected DVD for Front ZONE & Tuner for Rear ZONE. Once DUAL ZONE is turned "OFF",
Audio Output for all 4 speakers becomes "DVD" mode.
E - 18