VIETA CDV7200BT Owner's Manual page 20

MIDDLE
Middle (Level)
User has 5 seconds to use the encoder volume knob to adjust the desired Middle level
range from -6 to +6.
Middle-CFQ (C.Frq)
User has 5 seconds to use the encoder volume knob to adjust the desired Middle Range
Center Frequency to 500Hz, 1KHz, 1.5KHz, or 2.5KHz.
Middle-Q (Mid-Q)
User has 5 seconds to use the encoder vlome knob to adjust the desired Middle Quality
Factor to 2N, 1N, 1W or 2W.
Figure 2 shows the middle Quality factor (Curve characteristics) of each step.
Level
(dB)
TREBLE
Treble (Level)
User has 5 seconds to use the encodr volume knob to adjust the desired Treble level range
from -6 to +6.
Treble CFQ (Freq)
User has 5 seconds to use the encoder volume knob to adjust the desired Treble center
frequency to 10KHz, 12.5KHz, 15KHz, or 17.5KHz.
BALANCE
User has 5 seconds to use the encoder volume knob to adjust the Balance between the
right and left speakers from R12 (full right) to L12 (full left). "C00" represents an equal
balance between the right and left speakers.
FADER
User has 5 seconds to use encoder volume knob to adjust the Fader between the front and
rear speakers from R12 (full rear) to F12 (full front). "C00" represents an equal balance
between the front and rear speakers.
15
10
5
0
100
10
Frequency (Hz)
E - 20
1N
1W
2W
2N
3 4
1.10 1.10
5
1.10
Figure 2