Menu Operations - VIETA CDV7200BT Owner's Manual

Menu operations

18) MENU FUNCTION LIST (MENU)
Press & hold the DISPLAY/ MENU button for more than 3 seconds to access into the
menu. User can navigate thru the menu items by pressing the DISPLAY/ MENU button
repeatedly, or by pressing the Tuning Up or Tuning Down Buttons to move to the next or
previous menu item. Once the desired menu item appears on the display, user can adjust
that option by using the Encoder Vol Knob within 5 seconds. The menu items can be
adjusted as described below:
Paring
This feature is used to pairing the unit's Blue tooth system to your mobile phone or other
Blue tooth device. Under the MENU "Pairing" mode then press Audio button to start
activating the Pairing.
Tips
Pls refer to BLUE TOOTH HAND FREE Operation regarding the details operation of
"PAIRING".
Re-connection/Dis-connection
This feature is allows to Re-connect or Dis-connect to the paired mobile phone or Blue tooth
device by manually. Under the Menu- "RECONNECTION"mode, Rotate the encoder to
navigate thru "RECONNECTION" and "DISCONNECTION". After selected the mode for
connection then press Audio button to start activating the connection mode.
Incoming call ringing volume (PHONE VOL)
The unit can preset the Ringing volume level for any incoming call. The default RINGING
VOLUME LEVEL VALUE is "20". Rotate the encoder knob to adjust from Min 00 to Max 38.
Angle
The panel viewing angle of the display can be adjusted by rotating the encoder
vol knob to select the most appropriate viewing angle. This is useful for
user to adjust & obtain the optimum viewing angle inside the vehicle.
Contrast
The contrast level of the TFT display is set at "CONTRAST 10" by default. User can use the
Encoder Vol Knob to adjust the contrast level from 00 to 50.
Bright
The brightness level of the TFT display is set at "BRIGHT 20" by default. User can use the
Encoder Vol Knob to adjust the brightness level from 00 to 50.
Color
The color level of the TFT display is set at "COLOR 30" by default. User can use the Encoder
Vol Knob to adjust the color level from 00 to 50.
Date Set
Once in Date Set mode, User can use the Encoder Vol Knob to adjust the Date / Month /
Year. Short press the AUDIO button to confirm the entry and move to the next entry.
Clock
The time of the clock is set to 12:00 by default. User can adjust the time by rotate the
Encoder Vol knob clockwise to adjust the minute and rotate the Encoder Vol knob anti-
clockwise to adjust the hour.
If the unit is equipped with the OPTIONAL RDS Function, the clock will be
automatically updated by the RDS broadcasting, provided if the RDS broadcast does
include the clock information ( RDS CT FUNCTION )
Time Form
"12H" is the default setting. User can use the Encoder Vol Knob to choose the Time Format
between "12 Hours" & "24 Hours"
E - 16