Usb Operation - VIETA CDV7200BT Owner's Manual

23. USB OPERATION

The unit can support playback MP3 / WMA / JPEG / MPEG4 format which are stored on the
Memory Stick . Please read carefully the below instruction before you start the operation of USB
Function.
Mode change to USB HOST
Under any other mode while inserting a USB Stick into the USB connector, the unit will
automatically switches from the current mode to USB mode .
Once the unit read the USB Stick successfully, the first audio music file on the USB stick
Playback will Automatically start. Press Mode button repeatedly to change to other mode or
switch back to USB mode.
WARNING:
Before removing the USB stick from the USB connector. Please always remember to switch off the
unit's power or switch to other mode then remove out the USB Stick. Never try removing the USB
Stick while playing music file on the USB stick. It may damage the USB Stick and sometimes will
caused the unit system to lock up.
The unit can support playback Music Player which have USB Interface. However due to the
fast changing decoder technology and different kind of hardware interface, this unit may or
may not be compatible to all the Music Player and USB Stick especially those USB Stick /
Player which require to install a program driver.
About Music Flash Player with USB Interface, usually, the unit takes longer time to read this
kind of player than normal USB Stick. Especially, if the Flash Player with built-in power
battery sometimes takes 20-30 seconds to start up the playback
This unit is not compatible to any Portable type Hard disk.
File Playback Operation
All the USB playback operation function is same as the operation on CD/MP3/WMA. Pls refer
to 'CD/MP3/WMA Operation' for more details.
Inserting and Removing USB Drive
E -55
USB