Outgoing Call; Call Transfer; Highlight Features - VIETA CDV7200BT Owner's Manual

OUTGOING CALL

Use the mobile phone which paired with this unit to making an outgoing call.
During the talking mode, the LCD Display will display "
User can use the volume up/down to adjust the volume level.
To end the conversation, press the "CLEAR(BAND)" button . The unit will switch back to
the previous mode automatically. The mute of the previous mode will be released at the
same time.
During the talking mode, if the Ignition is being turned off, the unit will keep the
conversation even if the Ignition is Switched off. After finished the conversation, User can
press "CLEAR(BAND)" button to switch off the unit.

CALL TRANSFER

TO AUDIO TRANSFER FROM HEAD UNIT BACK TO THE MOBILE PHONE
During the talking mode, user can LONG press the "TRANSFER"(MODE) button more than
3 seconds to transfer the audio from the unit back to the mobile phone for privacy reason.
The LCD Display will
After the "Transfer" button is pressed, the mute of the present mode will be released at
the same time.
Depending on different type of Mobile Phone, the time need for activating the CALL
TRANSFER mode is different. Like Nokia Mobile Phone usually takes 3-5 seconds after
pressed the "TRANSFER" button for audio transfer back or forth through Unit to mobile
phone.

HIGHLIGHT FEATURES

Incoming call ringing volume
Preset the Ringing volume level for any incoming call.
Pls see "MENU"- "PHONE VOL " for details operation.
CALL TRANSFER !
E - 33
"
TALKING ...