Connection; Connect To The Tv; Connecting The Speakers - VIETA VHC200 Owner's Manual

Connection

Caution: Please turn off all the equipment power before connecting.

Connect to the TV

Terminal board for the DVD player
Terminal board for the TV

Connecting the Speakers

Right Speaker Box
1506D-e(#EJS89S,re-11)-1.p65
Safety precautions
Connect the speaker cords between the terminals as
shown below.
Left Speaker Box
Connection precautions
- 3 -
3
1. This unit has video and S terminal output modes,
please choose one to connect with the TV
terminal. (Use S terminal output to get clearer
picture.)
2. If your TV has component input terminal, then
you can use the signal connecting cable to
connect with the unit's component output
terminal. By doing so, the picture will be more
clear.
3. To avoid affecting the picture output, don't
connect video, S terminal, component at the
same time.
4. DVD Player setting
Some settings should be made for the unit
according to the TV connection.
* According to the colour system setting of TV,
select the colour system in the "TV Display"
function setting.
* If the unit is connected to a wide screen TV, then
set the "TV display" to "Wide" in the function
setting menu.
* If the unit is connected to a TV, then set "TV
display" to "Normal/PS" or "Normal/LB" in the
function setting item.
1. The unit's output has wide dynamic range, so
the amplifier's volume should be moderated, if
other speakers are used, they must be closed
correctly according to our speaker's
specification, or the loud speaker will be
damaged by the heavy volume.
2. Before connect or cut short the unit's power,
please turn the volume to minimum firstly or it
may damage the loudspeaker.
2009-10-27, 11:05