VIETA VHC200 Owner's Manual page 14

Press
memory even if the player is switched off.)
(Note: If the item displays in gray, that means that it can't be setup and there isn't this
General Setup Page
l l l l l
Audio Setup Page
l l l l l
1506D-e(#EJS89S,re-11)-1.p65
button to exit from the menu. (The settings will be stored in the player's
SETUP
function in the disc.)
TV Display
OSD Language
Screen Saver
SPDIF Output
DUAL MONO
Reverb Mode
AUDIO SYNC
13
Normal/PS --- When selecting this mode, wide picture
displayed on the screen will be cut automatically.
Normal/LB --- When selecting this mode, wide picture
displayed on the screen will have black top and bottom
area.
Wide --- If this system connects wide screen TV, se-
lecting this mode.
This menu allows the user to select the language for
the on-screen display.
Set the screen saver to activate or cancel.
You can choose output mode when playing different
disc.
OFF --- Turns off the SPDIF output.
SPDIF/RAW --- If you have connected your DIGITAL OUT
(COAXIAL) to a multi-channel decoder/receiver.
SPDIF/PCM --- Only if your receiver is not capable of
decoding multi-channel audio.
Select the setting that matches the number of speak-
ers you have connected.
STEREO --- Left mono sound will send output signals
to Left speaker and Right mono sound will send output
signals to Right speaker.
L-MONO --- Left mono sound will send output signals
to Left speaker and Right speaker.
R-MONO --- Right mono sound will send output sig-
nals to Left speaker and Right speaker.
Reverb mode provides a virtual surround sound expe-
rience using just two speakers.
This menu helps you to set the delay time when the
image and the sound can not be played in the same
time.
Audio Delay: 0ms~200ms.
- 13 -
2009-10-27, 11:05