Setting The Sleep Timer; Protect The Disc - VIETA VHC200 Owner's Manual

Setting the Sleep Timer

Use the sleep timer to turn the system off after a some time when playing. By setting the
l
sleep timer, you can fall asleep and know that your system will turn off by itself rather than
playing all night.
- Play a disc or tune in to the desired station.
- If you set the sleep timer first, each time you press the sleep button (
the number of minutes shown on the VFD in this sequence:
After setting the number of minutes for the sleep timer, the display will return to the
display as before setting the sleep timer.
The system is now set to turn off after the number of minutes you set.
To confirm the sleep time
When pressing the sleep button (
seconds the display returns to the original display.
To cancel the sleep timer setting
Repeatedly press the sleep button (
It can also cancel the sleep timer by restart set the clock or turning off the system.

Protect the Disc

1. To keep the disc clean, please don't touch the disc's surface when you are holding it. You should hold
the edge.
2. If the disc is dirty, it will affect the sound quality. Please use the clean and soft cloth to wipe the disc
from inside to outside. Don't wipe the disc in circular motion.
3. Don't stick paper on the disc.
4. Don't place discs in direct sunlight or near or on heat sources.
5. After you have finished with the disc, please place it back in its original case. To avoid warping or
damage, do not stack discs.
6. Don't play the disc which has flaw or deformation, in case of damaging this player.
7. Clean your discs using only a soft dry cloth. Do not use any chemicals such as benzine, thinner,
antistatic or record sprays as these can damage the disc surface.
1506D-e(#EJS89S,re-11)-1.p65
- -
10 20
), the remaining sleep time is displayed. After a few
SLEEP
SLEEP
- 19 -
19
...
80 90 OFF
) until the "OFF" displays on the VFD.
2009-10-27, 11:05
), it changes
SLEEP