Rds (Radio Data System) Reception - VIETA VHC200 Owner's Manual

You can store the well tuned station by pressing the memory button (
preset up to 16 FM stations.)
Tune in the desired station, then press the memory button (
l
Use the
l
number. (You can also operate the key "
Press the memory button (
l
to the broadcast frequency display.
Note: If the system is unplugged or if a power failure occurs, the preset stations will
remain stored in the memory.
Press the channel select forward button (
l
after presetting station. Its band and frequency are displayed on the VFD.
Press the channel select forward button (
when in store the station.
Press the channel select backward button (
l
before presetting station. Its band and frequency are displayed on the VFD.
Press the channel select backward button (
number when in store the station.
(You can also operate the key "
Press the stereo/mono select button (
receive the FM radio mode, it can get the best effect.

RDS (Radio Data System) Reception

Many FM stations are broadcasting added data compatible with RDS. This radio set offers convenient
functions using such data.
w w w w w PS (Program Service Name)
When an RDS station is received, the RDS indicator lights and automatically displays
the name of that station instead of the frequency. When RDS display button (RDS) on the
remote control is pressed during PS display, the CT is displayed for 3 seconds, then PS
display returns.
w w w w w PTY (Program Type)
Program type identification signal. (Example: News, Rock, Classical music.)
w w w w w CT (Clock Time System)
The CT system may not properly operate in areas where RDS CT service is not available.
Once CT service is received, the CT system keeps operating. "RDS CLOCK" is dis-
played in areas where no CT services are available.
w w w w w Changing Display
During PS display, press the RDS display button (RDS) on the remote control repeatedly
to select the CT, PTY or Frequency. They will be displayed for 3 seconds, then the PS
display returns.
1506D-e(#EJS89S,re-11)-1.p65
button or button on the remote control once by once to select the preset
H G
PROGRAM
- PRESET +
- 17 -
17
PROGRAM
, " on the panel of unit.)
G H
) to store the station. After 1 second, the VFD returns
) once by once to select preset number
G
) once by once to select the preset number
G
) once by once to select preset number
H
) once by once to select the preset
H
" on the panel of unit.)
) to select the Stereo or MONO channel to
MODE
2009-10-27, 11:05
). (You can
PROGRAM
).