Clock/Timer Functions; Setting The Clock; Setting The Daily Timer - VIETA VHC200 Owner's Manual

Clock/Timer Functions

Setting the Clock

The built-in clock shows the correct time in the display.
- In standby mode, press the clock button (
- Set the hour with the
- Press the clock button (
- Set the minute with the
- Press the clock button (
counting from 0.
Note:
* You can only set the daily timer only in standby mode.
* The operating time of every step shouldn't be longer than 10 seconds or it will return to
the original display.
* If there is a power failure or the power system is turned off, the clock will lose its setting.
To confirm the clock time
* In standby mode, when you press the clock button (
Wait for a few seconds until the display returns to the original display.
* In ECO power standby mode, when you press the clock button (
(
TIMER
original display.

Setting the Daily Timer

In standby mode, you can use the daily timer setting to turn the unit on automatically at a
l
certain time everyday under standby mode. When the setting timer is on, the timer
indictor " " will display on the VFD, however the clock must be set correctly for the timer
function to work.
- In standby mode, press the timer button (
- Set the hour with the
- Press the timer button (
- Set the minute with the
- Press the timer button (
(daily timer set is in effect) or "OFF" (daily timer set is to cancel) by pressing the
button or
Note:
* You can only set the daily timer only in standby mode.
* The operating time of every step shouldn't be longer than 10 seconds or it will return to
time display.
* The sound source of the "timer on" mode is the same as the sound source when the unit
was turned off by the standby switch.
To confirm the daily time
Press the timer button (
second until the display returns to the time display.
To cancel the daily timer setting
In standby mode, repeatedly press the timer button (
VFD, then you can set the daily timer to "OFF" by pressing the
(the daily timer will be cancelled).
Turning off the system also cancels the daily timer.
1506D-e(#EJS89S,re-11)-1.p65
button or
VOL-
), minute indicator will blink.
CLOCK
button or
VOL-
), the built-in clock starts operating and the seconds start
CLOCK
), the clock time is displayed. Wait for a few seconds until the display returns to the
button or
VOL-
), minute indicator will blink.
TIMER
button or
VOL-
), the selected time is set. Then set the daily timer to "ON"
TIMER
button.
VOL+
) in standby mode, the daily time is displayed. Wait for a
TIMER
18
), hour indicator will blink.
CLOCK
button.
VOL+
button.
VOL+
CLOCK
), hour indicator will blink.
TIMER
button.
VOL+
button.
VOL+
) until the "ON" will display on the
TIMER
- 18 -
2009-10-27, 11:05
), the clock time is displayed.
) or timer button
CLOCK
VOL-
button or button
VOL- VOL+