VIETA VHC200 Owner's Manual page 15

Video Setup Page
l l l l l
1506D-e(#EJS89S,re-11)-1.p65
Component
Sets the video output according to your video
connection. This setting is not required if you are using
the VIDEO OUTPUT jack (yellow) to connect the DVD
micro system to your TV.
S-Video --- Select this if you have connected the DVD
micro system to your TV using S-Video jack.
Pr/Cr Pb/Cb Y --- Select this if you have connected the
DVD micro system to your TV using Component video
jacks.
TV MODE
Selects Progressive or interlace video output mode
when Pr/Cr Pb/Cb Y is selected.
In the progressive scan mode, you can enjoy the high
quality picture with less flickers. It only works when you
have connected the DVD player's Y Pb Pr jacks to your
TV that supports the progressive video input.
Otherwise, a distorted picture will appear on the TV.
Quality
This menu helps you to set the video quality.
Sharpness
Adjusts the sharpness level. High, Medium and Low.
Brightness
Adjusts the brightness level. Range: -20-+20.
Contrast
Adjusts the contrast level. Range: -16-+16.
Gamma
Adjusts the gamma level. High, Medium, Low and None.
Hue
Adjusts the hue level. Range: -9-+9.
Saturation
Adjusts the saturation level. Range: -9-+9.
Luma Delay
Adjusts the luma delay. 0 T and 1 T.
HDMI Setup
This option is used to enable/disable HDMI output.
HDMI
Auto --- Enables HDMI output automatically.
Off --- Disables HDMI output.
RESOLUTION
The resolution options include 480p(60Hz), 720p
(60Hz), 1080i(60Hz), 1080p(60Hz), 576p(50Hz), 720p
(50Hz), 1080i(50Hz) and 1080p(50Hz).
Notes: If no display appears on the TV screen due to
- 14 -
14
unsupported resolution, reconnect any
available interlace video output to your display
and re-adjust the resolution settings to 480p/
576p.
2009-10-27, 11:05