Connection Of Dvd And Tv - VIETA HMD400 User Manual

CONNECTION OF DVD AND TV

1.If your TV has AV terminals,connect this unit to TV with the attached AV cables,and set
the TV to be AV status after confirming the connection is correct.(Figure 1)
2.If your TV has a jack for S-terminal,please use the S-terminal connection cable(not
attached) to connect the DVD player,to obtain a higher quality images.(Figure 2)
3.If your TV has a component output terminals(also called chromatism output)please use
three groups of connecting wires to connect the DVD component output with the input
terminals correspondingly to obtain a more vivid image.(Figure 3)
Note:
1.Please turn off the power switch of both DVD player and TV before they are connected, and unplug the power
from the socket on the wall.
2.When watching the disc with different system ,adjust the corresponding system according to your TV
system.(NTSC/PAL/AUTO)
3.If there are multiple connections between DVD player and TV ,select one and unplug other connections so as not to
affect the quality of images and sounds.
4.Do not switch the power on and off frequently,switch on and off each time must have an interval of 3 seconds.
5.Do not connect the digital optical output or coaxial output jack of DVD player with the analogue input terminal for
reception.
8
plug