Connect To The Fm Antenna; Connecting To A Tv With Hdmi Jack; Connect To The Assistance Equipment - VIETA VHC200 Owner's Manual

Connect to the FM Antenna

Terminal board for the DVD player
Terminal board for the DVD player

Connecting to a TV with HDMI Jack

Terminal board for the DVD player
Terminal board for the TV

Connect to the assistance equipment

Terminal board for the DVD player
Terminal board
for the assistance equipment
1506D-e(#EJS89S,re-11)-1.p65
Connect the supplied FM wire antenna to the FM Antenna socket
on the unit.
If reception is poor, connect the outside antenna.
Note:
Before attaching a 75 ohm coaxial lead (the kind with a round
wire going to an outside antenna), disconnect the supplied FM
wire antenna.
Caution:
To avoid noise, keep antennas away from the system, the con-
necting cord and the AC power cord.
HDMI connects untouched and uncompressed digital
transmission for the highest and crispest sound/image
quality.
It has plug and play capability using only one cable for
both audio/video output.
Use a HDMI cable (not supplied) to connect the HDMI jack
on the DVD Player to HDMI IN on a HDMI compatible de-
vice (e.g.; TV, Projector, Adaptor).
This DVD player has a groups of audio input terminals,
you can use signal line to connect audio input terminals
of this unit and audio output terminals of assistance equip-
ment respectively, then you can hear the sound sources.
- 4 -
4 2009-10-27, 11:05