CONNECTION OF DIGITAL AUDI OUTPUT AND DOLBY DIGITAL
STEREO
The Setting of Digital Audio Output:
1.Connect the coaxial jack of DVD player and amplifier of DVD player and amplifier.
2.In the status of STOP or PLAY ,press STEUP key ,the system set page is displayed on the TV screen.And press the
LEFT/RIGHT direction key to switch the cursor to AUDIO SET,and then press the DOWN direction key to move the
cursor to the setting of DIGITAL OUTPUT ,press RIGHT direction key to switch to SPDIF/RAW or SPDIF/PCM,and press
PLAY/ENTER key ,the SETUP key exits after completion.
9