Listening To Radio Broadcasts; Rds (Radio Data System) Reception; Program Radio Stations - VIETA VH-MS570BT User Manual

Listening to Radio Broadcasts

Caution:
Before listening to the radio, please check that the FM
Antenna is correctly connected and adjusted for length
and direction.
Tuning in to a Station
1. Repeatedly press the SOURCE button on the unit or
directly press the FM button on the remote control to
select tuner source.
- The word "TUNER" will be displayed on the front
panel.
2. Select a station using one of the following methods.
• Auto Tuning
Press and hold the /
/ button on the remote control for one second or
more, the frequency changes down or up automatically
until a station is found.
• Manual Tuning
Repeatedly press the
/ button on the remote control to change the
frequency until you find the station you want.
• Preset Tuning (Available only after the stations are
preset)
Repeatedly press the
desired preset number. Its band and frequency are
displayed on the front panel.

Program radio stations

You can program a maximum of 20 preset radio stations
(FM).
• Automatically
Press and hold the PROG button on the remote control
for two second or more to activate automatic program
mode.
- [AUTO] is displayed.
- All available stations are programmed.
- The first programmed radio station is broadcast
automatically.
• Manually
1. Tune to a radio station.
2. Press the PROG button on the remote control to
activate program mode.
- The preset number will blink.
button on the unit or
/ button on the unit or
/ button to select the
3. Press the /
this radio station.
Note: If you select more than 20, the preset number will
be changed to "1" automatically.
4. Press the PROG button on the remote control again
to store the station.
5. Repeat above steps 1 to 4 for each station you want
to store in memory with a preset number.
Note: If the system is unplugged or if a power failure
occurs, the preset stations will not be erased.
To change the FM Reception Mode
Press the MODE button on the remote control to select
the Stereo or Mono channel to receive the best FM
reception mode.
RDS (Radio Data System)
Reception
Many FM stations are broadcasting added data
compatible with RDS (Radio Data System).
This radio set offers convenient functions using such
data.
Press the DISPLAY button on the remote control
repeatedly to select the information that displayed as
follows.
• Station Name
When an RDS station is received, the "RDS" and the
name of that station will be displayed.
• PTY (Programme Type)
This describes the "Style" or "genre" of music that is
being broadcast e.g. "Rock" or "Classical".
• Time
The broadcaster (Radio station) provides clock and
date information automatically so there's no need to
manually set this information.
• Text
The broadcaster can include a scrolling text that
displays information about the current program.
• Frequency
This shows the frequency of the current station e.g.
95.30MHz.
button to allocate a number to
31
ENGLISH