Tuner Operation - VIETA VPC55BT User Manual

9. TUNER OPERATION

NAVI LIST SEARCH ( NAVI )
Using the advance NAVI list search method on this unit, user can press he NAVI button access
into the NAVI SEARCH mode, then rotate the encoder knob to select the desired preset
memory station to listen. Once selected the desired preset memory on the list, press the
"MENU" button to confirm and begin the playback.
BAND BUTTON( BAND/SEARCH )
Press BAND to change between FM bands and AM(MW)bands.
TUNING UP/DOWN BUTTON (
Manual Tuning
Press the Up Tuning or Down Tuning button for more than 3 seconds to move the radio
frequency one step up or down .
Auto Seek Tuning
Press the Up Tuning or Down Tuning button for less than 3 seconds to search for the next
station automatically.
PRESET STATIONS BUTTONS
There are six numbered preset buttons store and recall stations for each band.
Store a Station
Select a band (if needed), then select a station. Hold a preset button for 3 seconds. The preset
number will appear in the display.
Recall a Station
Select a band (if needed). Press a preset button to select the corresponding stored station.
AUTOMATICALLY STORE / PRESET SCAN (AS/PS)
Automatically Store
Automatically select 6 strong stations and store them in the current band. Select a band (if
needed). Press AS/PS button for more than three seconds. The new stations will replace stations
already stored in that band.
Preset Scan
Scan stations stored in the current band. Select a band (if needed), press AS/PS button for
less than 3 seconds. The unit will pause for ten seconds at each preset station. Press AS/PS
button again to stop scanning when the desired station is reached.
STEREO
The unit will automatically pick up a stereo signal, when available. When in stereo mode, the
ST icon appears in the display. When no stereo signal is available, the unit will automatically
change to mono operation, and no icon will be displayed.
)
BR - 18