Ipod Operation - VIETA VPC55BT User Manual

19. iPod OPERATION

This unit is equipped with iPod Ready function which allow end user to have direct control of the
iPod on the unit and display iPod song information on the unit's LCD display. Please read below for
more details operation.
iPod Compatibility Chart
This unit is support following iPod software version
iPod 1G
iPod 2G
iPod 3G
iPod Mini
iPod 4G
iPod Photo
iPod Nano
iPod 5G(Video)
iPod Classic
iTouch
Connect the iPod to this unit
iPod
photo
About Video File
This unit is NOT ABLE to select any VIDEO FILE OR VIDEO ALBUM which contained in the iPod
Video. This unit will only automatically select Music Album or File regardless the connected Video
iPod last playing is a Video File or Album.
Turning iPod Power On and Off
The iPod power turns on automatically as soon as it is connected to the 30 Pin Connector and as
long as the vehicle's ignition is turned ON. The iPod power can be turned OFF by removing the
iPod from the 30 Pin Connector or if the vehicle's ignition is turned OFF. Under this condition the
iPod will go into pause mode and goes into sleep mode about 2 minutes later.
While the iPod is connected, the power cannot be turned on or off from the iPod itself.
Tips
" " to disconnect will be shown in the iPod's display while it is connected to the unit .
OK to disconnect
iPod Battery Charging
While connected to the unit, the iPod will automatically start re-charging as long as the vehicle's
ignition key is turn to ACC or ON.
Not Supported
Not Supported
Firmware Version 2.2
All versions
All versions
All versions
All versions
All versions
All versions
All versions
8 Din iPod Ready Cable
HEAD UNIT
iPod iPod iPod
mini nano
iPod Cable
BR - 34