Table of Contents
Advertisement
Hands-Free Phoning
Answering An Incoming Call
User can press the "ENTER" (MENU) button or "MODE" button to answer / accept the
incoming call.
(1) When there is an incoming call, the ring tone is output from the car speaker, and
the caller number will be shown on the display. If the incoming call has no caller
number, the display will shown "UNKNOWN".
(2) Always press the "ENTER (MENU) button or "MODE ' button to answer / accept
the call after the display showing the "Caller Number" or "UNKNOWN".
(3) The audio output of the current mode will be muted and the ringing tone will be
heard. If an incoming call do not want to be answered, user can use the encoder
knob to adjust the ring tone level.
(4) If there is an incoming call during the stand by mode (Ignition on & Power Off),
this unit will automatically switch on.
(5) While there is an Incoming call or during talking mode, the Panel Open/Eject key
will be disabled.
Ending A Call
To end a call, press the "CLEAR" button, and the unit will automatically switch back
to the previous mode and release the "Mute" at the same time.
Rejecting An Incoming Call
User can press the "CLEAR" (BAND) button to reject an incoming call.
Making An Outing Call
User can dial the phone number either on the Mobile Phone or simply directly
entering phone numbers on the front panel of this unit.
(1) Press the "ENTER" (MENU) button to start making an outgoing call, and "CALL
MENU" will be shown on the display.
(2) Use the encoder knob to navigate thru the numeric 0-9 *, # & +.
(3) Press the "ENTER" button to confirm the input of the selected number.
(4) Use the Track up/down button to move the cursor back or forward and use the
"BAND" to clear the wrong input number.
(5) Once the phone number has been entered completely, Press the "MODE" button
to start dialing the call, and the display will show "CALLING" along with the
dialed number.
During the Calling mode, if need to input any number, for ex, the Pin Code
Tips
Input or Service Number Dial Input, user can Short press the "ENTER"
(MENU) button to enter into the numeric input interface, and then rotate the
encoder knob to navigate thru the desires input number and press the
"ENTER" button again to confirm the input of the selected number.
a. While there is an outgoing call or during talking mode, the Panel Open/Eject
key is disabled.
b. User can use the volume up/down to adjust the talking volume level.
c. To end the conversation, press the "CLEAR" (BAND) button. The unit will
switch back to the previous mode automatically. The mute of the previous
mode will be released at the same time.
BR - 47
Advertisement
Table of Contents
