Table of Contents
Advertisement
Key Beep Tone
The beep tone feature allows the selection of an audible beep tone to be heard each time
any button is being pressed on the panel of this unit. "On" is the default. Rotate the encoder
knob to select the "Off" option.
Program Vol
This option allows the setting of the volume level of this unit will automatically assume
when first turned on. Volume level "12" is the default setting. To program a specific volume
level for the unit when turn on, rotate the encoder knob to select the desired volume level.
Tuner setting menu
The following items can be adjusted once accessed into the tuner menu.
Tuner Set - Local or Distance Select
This feature is used to designate the strength of the signals at which the radio will stop
during automatic tuning. "Distance" is the default, allowing the radio to stop at a broader
range of signals. To set the unit to select only strong local stations during automatic tuning,
rotate the encoder knob to select "Local" mode.
AREA - Tuner frequency spacing
This option allows the selection of the frequency spacing appropriate for your area.
Rotate the encoder knob to select the U.S.A., Latin America, Europe or Oirt options.
Auto Seek – RDS / ALL selection
Auto Seek "RDS" will be displayed by default. If "ALL" is selected, during the Auto Seek
tuning mode, the unit will stop at all radio station including Non RDS station regardless
AF and TA is switched on. If "RDS" was selected and the AF is on, during the Auto Seek
tuning mode. The unit will stop at only RDS station.
TA Seek – On /Off selection
TA Seek "On" will be displayed by default. If selected "On" mode, when a received station
does not have TP information for 60 seconds, the unit automatic search to next station
which does not have the same station (PI), but has TP information. When a TP information
get lost at the current station over the default retune time (60 seconds), the unit start to
search to next same PI station. When the same PI station does not catch in 1 cyclic search,
the unit retunes to next station with TP information. If "Off" is selected, when a received
station dose not have TP information for 60 seconds, a Double Beep Sound (Alarm) is
output and the LCD will be displayed "Lost TP TA" but the retune mode is not activated.
This function is only activated when "TA" is turned 'on'.
TA Volume
TA Volume "18" will be displayed by default. Rotate the encoder knob adjust from "0-40".
When TA function is activated, if a TA program is tuned in, the volume level will automatically
set to this set up volume, regardless of the current volume of the current mode.
BR - 14
Advertisement
Table of Contents
