VIETA VPC55BT User Manual page 44

Pairing, Connecting And Deleting With A Bluetooth Device
When connecting Bluetooth devices at the first time with this unit, a mutual
registration is required, this is called "Pairing". This registration (Pairing) is
required only at the first time, as this unit and the other devices will recognize
each other automatically from the next time.
After the devices are registered (Paired) with this unit. User can select the
registered device and connect it, this is called "Connecting".
This unit can Paired up to 8 devices with Hands free and / or Audio devices.
Tips
If the pairing Bluetooth device has both HFP (Hands Free Profile) and A2DP
Tips
(Advance Audio Distribution Profile). This unit will automatically pairing these two
profiles at the same time.
Pairing - There Are Two Different Methods To Search For A
Bluetooth Device For Pairing:
Method 1-Searching available Bluetooth devices for Pairing "from this unit".
(1) Access into MENU of BT - PAIRING mode to activate the Pairing procedure.
Please see MENU Operation for more details of how to access into MENU of
BT –PAIRING mode.
(2) Once the "PAIRING" appears on the display, press the ENTER (MENU) button to
activate the searching pairing device mode.
a. Please make sure to check the paring Bluetooth device, make sure the Bluetooth
mode is turned ON and the "VISBILITY" is set to "SHOW".
b.Please make sure to keep the other Bluetooth device within 2 meters from
this unit when making the pairing.
To cancel the pairing, you can press the "CLEAR" (BAND) button at any time.
Tips
(3) When searching is completed, the detected device name(s) will be displayed in a
list.
(4) Use the encoder knob to select the device name which want to be connected /
paired.
(5) Press ENTER (MENU) button to start the pairing with the selected device in the list.
(6) Password Input: user can input minimum 1 & up to maximum 4 of any numeric
number between 0 to 9, as the password for this unit.
(7) Press MODE button to confirm of the password input, and the Pairing process
should start.
(8) "BT70" should appear on the pairing device, user should select & accept pair with
"BT70" and then input the same password which was input on this unit previously
on above step 6.
Please refer to the instruction manual of the Bluetooth device on how to enter
into the Bluetooth set up, blue tooth on / off, and Bluetooth pairing.
(9) If the pairing is successful, the display will display
Bluetooth device's name. If the pairing failed,
for 3 seconds, and the unit will automatically switch back to the previous mode.
During the Pairing, only the Clear, Volume +/- & Mute buttons are functional, all
the other function keys are disabled & non-operational during the pairing mode.
BR - 44
and the
will be displayed