Gerni classic 120.2 User Manual
  1. Manuals
  2. Brands
  3. Gerni Manuals
  4. Pressure Washer
  5. Classic 120.2
  6. User manual

Gerni classic 120.2 User Manual

Hide thumbs Also See for classic 120.2:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Classic 120.2
User Guide
Classic 120.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the classic 120.2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Gerni classic 120.2

Summary of Contents for Gerni classic 120.2

  • Page 1 Classic 120.2 User Guide Classic 120.2...

  • Page 3: Table Of Contents

    fi nd any, do not start up ment or the machine it- rate the machine. your machine and contact self. your Gerni distributor.  Never try to clean clothes This appliance is not in- or footwear on yourself tended for use by children Especially check: or other persons.
  • Page 4 being struck by debris  It is not allowed to clean  The electric installation dislodged during opera- asbestos- containing sur- shall be made by a certi- tion. Wear goggles and faces with high pressure. fi ed electrician. protection clothes during ...

  • Page 5: Description

    2 Description 2.1 Application This high-pressure washer Section 5 describes the use has been developed for do- of the high-pressure washer mestic use within: for vaious cleaning jobs. - Car, motorbike, boat, Only use the high-pressure caravan, trailer, patio/ washer for purposes de- drive/fl...

  • Page 6: Before You Start Using Your Pressure Washer

    3 Before you start using your pressure washer 3.1 Mounting of trolley 1. Mount the trolley handle handle and hose (12) on the machine. hook 2. Mount the hose hook (13) on the handle. 3.2 Mounting of quick 1. Screw the quick coupling coupling tight on to the water inlet (2).

  • Page 7: Operating Your Pressure Washer

    4 Operating your pressure washer 4.1 Connection of high 1. Mount the high pressure pressure hose hose on the outlet (3). 4.2 Mounting of spray 1. Push the spray lance (6) Note: The lance and Click & into the spray gun (7) spray lance (6) Clean nozzles and screw it on.
  • Page 8 4.3 Water connection An ordinary 1/2" garden of running hose of min. 10 m and sands in the max. 25 m will be suitable. inlet water (i.e. from your own well), an additional fi lter should be mounted. 1. Let the water run through the water hose before connecting it to the ma- chine to prevent sand...

  • Page 9: Suction Mode

    4.5 Start the machine The washer can take in wa- water spillage, bend the (when connected ter from a rain water tank water inlet hose inside to open containers as an example. The hose the water and then con- (suction mode)) for the water supply must nect to the machine with not be too long, approx.

  • Page 10: Fields Of Application And Working Methods

    5 Fields of application and working methods 5.1 General Effi cient high presure cleaning is achieved by following a few guidelines, combined with your own personal experi- ence of specifi c cleaning tasks. Accessories and deter- gents, when correctly chosen, can increase the effi ciency of your pressure washer.
  • Page 11 5.2 Typical fi elds of application Below you will fi nd a description of a lot of cleaning tasks which can be solved by a pres- sure washer from Nilfi sk in association with accessories and detergents. Task Accessories Cleaning method ‘Click &...

  • Page 12: After Using Your Pressure Washer

    6 After using your pressure washer 6.1 Storing the washer The machine should be 3. Stop the machine, unplug stored in a frost-free and wind up hose and  room! cable. 4. Place spray handle, noz- Pump, hose and accessories zles and other accesso- should always be emptied ries in the holders of the...
  • Page 13 6.4 Wall storage The pressure washer can be stored on a wall on a spe- cial wall hook (not stand- ard). Only mount the wall hook on a sturdy wall. Adjust the length of the screws and size of rawlplugs to the type of wall.

  • Page 14: Maintenance

    7 Maintenance WARNING! Always dis-  Wash out water hose, connect the electrical plug high pressure hose, spray from the socket prior to lance and accessories maintenance or cleaning. before mounting.  Clean the connectors of To ensure a long and dust and sand.
  • Page 15 7.2 Cleaning of nozzle A clogging up in the noz- zle causes a pump pressure which is too high. This is why cleaning is required immediately. 1. Stop the machine and disconnect the nozzle. 2. Clean the nozzle. IM- PORTANT: The cleaning tool (11) should only be used when the nozzle is detached!

  • Page 16: Trouble Shooting

    No water supply Connect inlet water. Water fi lter blocked Clean the fi lter (see section 7.1) Nozzle blocked Clean the nozzle (see section 7.2) In case problems other than the above occur, please contact your local Gerni distributor.

  • Page 17: Further Information

    The machine should be for- well as misuse are not warded to one of the serv- covered by the gu a ran- ice centres of the Gerni or- tee). ganisation with description/  that the directions of this spe ci fi ca ti on of the fault.

  • Page 18: Eu Declaration Of Conformity

    Equipment for quick cleaning of patio/drive/fl agstones. 10 EU Declaration of Conformity EU Declaration of Conformity Product: High Pressure Washer Type: Gerni Classic 120.2 Description: 230 V 1~, 50 Hz - IP X5 The design of the unit EC Machine Directive 2006/42/EC...
  • Page 20 NEW ZEALAND: AUSTRALIA: Accent Tools Ltd Nilfi sk-Advance Pty LTd 232 Bush Rd 48 Egerton St Albany Silverwater NSW 2128 Auckland 0632 Phone: 1300 556 710 Phone: 09 968 2610 E-mail: sales@gerni.com.au E-mail: sales@accent-tools.co.nz...

Table of Contents